|
|
1982D-1MM-010
 | D/D TILTED
|
CONECA: unknown | Crawford: unknown
Wexler: unknown | FS#: unlisted. |
Large Date Copper. Nice splits show on both serifs. NOTE: Many RPMs for 1982D look similar. Mint mark placement is a determining factor when attributing your coins.
F12 |
VF20 |
EF40 |
AU50 |
MS60 |
MS63 |
MS65 |
.50 |
1.00 |
2.00 |
3.00 |
6.00 |
10.00 |
15.00 |
|
|
|
1982P-1DO-001
| CLASS 6
|
CONECA: unknown | Crawford: unknown
Wexler: unknown | FS#: unlisted. |
Large Date Copper. Nice extra thickness can be seen on the motto and LIBERTY, with the verticle bars of the L and I showing nearly twice the thickness, and small spit serifs on the top right corners.
F12 |
VF20 |
EF40 |
AU50 |
MS60 |
MS63 |
MS65 |
2.25 |
4.00 |
6.00 |
8.00 |
10.00 |
14.00 |
20.00 |
|
|
|
1982P-1DO-002
 | CLASS 5
|
CONECA: DDO-001 | Crawford: CDDO-001
Wexler: WDDO-002 | FS-01-101 |
Large Date Copper. A nice spread can be seen on GOD WE TRUST. On earlier die state examples, some light separation can also be seen on LIBERTY. NOTE: All coins examined in EDS or MDS have had a nice obverse misaligned die (MAD) error. Some LDS specimens have been reported without the MAD. Old CPG# 034.5
F12 |
VF20 |
EF40 |
AU50 |
MS60 |
MS63 |
MS65 |
5.00 |
10.00 |
15.00 |
20.00 |
70.00 |
125.00 |
200.00 |
|
|
|
1982P-1DO-003
| CLASS 6
|
CONECA: DDO-002 | Crawford: unknown
Wexler: unknown | FS#: unlisted. |
Large Date Zinc. Very similar to 1982P-1DO-001 except that this is on a copper plated zinc planchet, this variety shows nice extra thickness on the motto and LIBERTY, especially on the verticle bars of the L, I and B. The extra thickness decreases as you go clockwise on the devices.
F12 |
VF20 |
EF40 |
AU50 |
MS60 |
MS63 |
MS65 |
2.25 |
4.00 |
6.00 |
8.00 |
10.00 |
14.00 |
20.00 |
|
|
|
1982P-1DO-004
| CLASS 6
|
CONECA: unknown | Crawford: unknown
Wexler: unknown | FS#: unlisted. |
Extra thickness on LIBERTY and IGWT, with separation seen on the top right of WE
F12 |
VF20 |
EF40 |
AU50 |
MS60 |
MS63 |
MS65 |
2.00 |
4.00 |
6.00 |
8.00 |
10.00 |
14.00 |
20.00 |
|
|
|
1982P-1DR-001
 | CLASS 4
|
CONECA: DDR-001 | Crawford: unknown
Wexler: WDDR-002 | FS-01-1801 |
Small date zinc cent. Very strong doubling shows on all reverse devices. Some of the outer edges of the design show little or no doubling due to the conical shape of the die at the time of hubbing. As of December 2012, there have been only four examples reported that we know of. Values may change as more examples are reported and/or pieces sell. ADDITIONAL NOTE: A coin supplied by die variety expert Billy Crawford shows that the obverse die for this coin has been paired with a different reverse die. This may explain the rarity of this doubled die as it may have been caught early in the production run and the reverse die subsequently replaced.
F12 |
VF20 |
EF40 |
AU50 |
MS60 |
MS63 |
MS65 |
300.00 |
450.00 |
600.00 |
750.00 |
1000.00 |
3000.00 |
4500.00 |
|
|
|
1983D-1DO-001
 | CLASS 2 + 6
|
CONECA: unknown | Crawford: unknown
Wexler: unknown | FS#: unlisted. |
A light spread to the center of the die can be seen on the tip of the 3 in the date, and as a split on the R of TRUST. Light extra thickness can also be seen on TRUST and the date.
F12 |
VF20 |
EF40 |
AU50 |
MS60 |
MS63 |
MS65 |
2.00 |
4.00 |
6.00 |
8.00 |
10.00 |
12.00 |
15.00 |
|
|
|
1983D-1DO-002
| CLASS 2 + 6
|
CONECA: unknown | Crawford: CDDO-002
Wexler: unknown | FS#: unlisted. |
Very similar to 1983D-1DO-001 and 003, this die shows light extra thickness on TRUST and the date. Minor notching can be seen on the R of TRUST and the bottom of the 9 and 3 of the date. Mintmark positioning is critical in determining which die you have.
F12 |
VF20 |
EF40 |
AU50 |
MS60 |
MS63 |
MS65 |
2.00 |
4.00 |
6.00 |
8.00 |
10.00 |
12.00 |
15.00 |
|
|
|
1983D-1DO-003
| CLASS 2 + 6
|
CONECA: unknown | Crawford: unknown
Wexler: unknown | FS#: unlisted. |
Still another die that is very similar to 1983D-1DO-001 and 002. This die shows light extra thickness on TRUST and the date along with minor notching on the R of TRUST and the bottom of the 3 of the date. Mintmark positioning is critical in determining which dies you have.
F12 |
VF20 |
EF40 |
AU50 |
MS60 |
MS63 |
MS65 |
2.00 |
4.00 |
6.00 |
8.00 |
10.00 |
12.00 |
15.00 |
|
|
|
1983D-1DO-004
| CLASS 6
|
CONECA: unknown | Crawford: unknown
Wexler: unknown | FS#: unlisted. |
Light extra thickness can be seen in WE, TRUST, the date and lightly in LIBE. A notch is present on the base of the R in TRUST. This die is also similar to 1983D-1DO-001, 002 & 003. Mintmark positioning is critical in determining which dies you have.
F12 |
VF20 |
EF40 |
AU50 |
MS60 |
MS63 |
MS65 |
2.00 |
4.00 |
6.00 |
8.00 |
10.00 |
12.00 |
15.00 |
|
| |
