1982D-1MM-009?

[Dick]

Bob, could this be the 009? I use a baseline from the left side of the "1", to the left side of the "2"(base), of 4". Base of "1" to bottom serif of MM is 3". Same point to closest point of the "8", is 201/2". Same, to bottom of the "2", is3-1/2". Note, a line from the two serifs cross the inside nose of the "9".


I can't make an ID of this, yet. Still working on the rest.
Dick

[Bob P]

From having a real quick glimpse at it, I would say it is not #009. It looks as though yours is a bit further west than 009.

[Dick]

Bob, I agree. I can't find ANY with thet much tilt, or rotation CCW None on the site will line up the two serifs, with the tip of the curl of the "9". I think it could be a new type. I'll send it, with the others, when you have time, let me know. I have 8 others, and this will make 9. I'll have 10 for you when the time comes. If you can't read this, I'm not surprised. I had to take the wife to the hospital fior an appointment, and am blind as a bat!
Dic

[Bob P]

Dick,
Feel free to send it along with the others. When you have colleced enough to send, please email me and I will let you know when to ship them. I need to schedule the attributions so I don't run into problems with too many packages at the same time.

[coppercoins]

I don't see anything that indicates this coin is a die variety. Am I missing something?

[Dick]

Bob, and Chuck, the nystery is solved! It is a 1982D-1MM-004. I have several of them, and finally, after re-doing my measurements, AND, USING A BASE OF 4", AND going thru the "Tilted" section of the MM's, I can tell you it is a "-004"! I had missed one set of measurements. This set of measurements work on any MM, andi ncludes the "lateral displacement", types as well. Comes in very handy, if, and/or when there are NO markers!. Just thought you would like to know. So, Bob, the others will have to wait a bit longer. I'll send you an email when I have 10. Okay?
Dick

[Bob P]

Sounds great Dick. Way to be persistent!